+91 804 095 3488

madhus@madhusindia.com

Follow Us:

Facebook-f Instagram Linkedin Youtube

Lifts

Hanmecson DS7000N Plus

Inspection scissor lift

Hanmecson DS7000N Plus at-a-glance

  • A low profile with a 105 mm minimum height, is suitable for more vehicles with low chassis.
  • Master-slave synchronized hydraulic system ensures the synchronism of the two platforms.
  • The upper limit and lower limit systems improve operation safety.
  • Open front and rear with no structural connection between platforms or bases increases work area.
  • The advanced electro-hydraulic system is safe and reliable.
  • Could lower the lift by unloading oil manually in case of power off.
Visit Product Page

Hanmecson HF9000

Four Post Wheel Alignment Lift

Hanmecson HF9000 at-a-glance

  • Set up a superb look for the 4-wheel alignment, maintenance, inspection and Electro-hydraulic operation
  • 508mm runway widths
  • HF9000A model includes the AK4T bolt-on alignment kit (radius gauges not included)
  • The safety lock is dependable and safe to use since it is at the right height.
  • Pictured with optional rolling jack (ProJack 4500A)
  • Optional: air pump for rolling jack (ProJack-Kit)
Visit Product Page

Hanmecson Pro 9D Evo

SYMMETRIC TWO POST LIFT

Hanmecson Pro 9D Evo at-a-glance

SYMMETRIC TWO POST LIFT

4,000 kg lift capacity with 3-stage front & 2-stage rear arms and the capability to service a large range of road going vehicles, including EV

 

• Strong, single-piece symmetric column

• Lift carriage strength and design

• Load arm design and pick-up range

• 90 mm minimum pick-up height

• Single point operation • Quality workmanship

Visit Product Page

Hanmecson PRO 9D PLUS

Two Post Lift

Hanmecson Pro 9D Plus at-a-glance

  • Padded shut-off bar to prevent damage caused by lifting a vehicle too high
  • Powder coat finish- more durable than conventional finishes
  • Symmetric 2-post lift with Asymmetric arm design provides more pickup
    points than ever before.
  • Reliable, self-setting locking system with an easy-to-reach lock latch handle
  • Two heavy-duty hydraulic cylinders designed to minimize downtime by
    requiring little maintenance
  • Spring operated arm restraints, disengage at floor level
  • Anchor bolts included installation require 108mm of concrete
Visit Product Page

Hanmecson Wheel Alignment Scissor Lift – NBS40A-45

Wheel Alignment Scissor Lift

Hanmecson – NBS40A-45 at-a-glance

  • Inground design enables the platform to flush with the ground; adjustable active plates are suitable for vehicles of different wheelbases.
  • Integrated limit switch controls high lift positions, guaranteeing the accuracy of axle measurement and safe use.
  • Intuitive, easy-to-use control console design.
  • Easy to adjust platform extensions adapt for a wide range of vehicle lengths.
  • The upper limit can prevent the cylinder stuck and the vehicle from shaking.
  • A lower limit can protect the technicians from injuries.
Visit Product Page

Hunter RX45

The Scissor Alignment Lift - Enables FIA

RX45 at-a-glance

  • Open-front and rear access
  • Stainless steel turnplates standard
  • Built-in slip plates standard
  • Two moveable worksteps standard
Visit Product Page

MADHUS ALIGN LIFT 4.5T

Wheel Alignment Scissor Lift

MADHUS ALIGN LIFT 4.5T

  • High quality and robust hydraulic drive platforms scissor lift who require minimal maintenance
  • Powerful hydraulic unit with load-dependent lowering speed controller
  • Suitable for pit installation
  • With recesses for turning plates in the front and pneumatically lockable sliding plates in the back, including rails for the optional rolling bridge jack, pluggable platforms-connections beams, incl. metal protections covers and switch for the optional 24V LED Lighting.
  • Pneumatic unlocking of the safety locks, CE-Emergency Stop and acoustic signal through lowering
  • Emergency lowering device for lowering in case of power failure, monitoring of safety synchronization by light barrier.
  • Wheel alignment, Ideally suited for inspection, repairing jobs and testing stations for driver assistance systems
Visit Product Page

Platform-scissor lift ATH-Cross Lift 50

Wheel Alignment Scissor Lift

ATH-Cross Lift 50

• Platform-scissor lift, capacity 5000 kg, with integrated central lifting scissor, capacity 4000kg
• Perfect lift for automotive repairs, wheel alignment, headlamp beam and driving assistance system setting
• Serial with rails for optional rolling jack, stabilizing bars for the ramps, with recess for turn plates in the front and already installed mechanically lockable sliding plates in the back
• Incl. metal cover and on/off switch for optional 24V LED lighting kit
• Suitable for in-ground installation or surface mounting with optional kit (1000003.01)

Visit Product Page

RAV 1380

Quick Lift

RAV 540 at-a-glance

  • CE-approved lift with low voltage controls.
  • High productivity lift for an efficient tyre shop. Easy to install both indoor and outdoor
  • Easy to perform Tyre rotation
  • Change all four tyres in a single operation
  • Automatic locking latches for safe operation
  • Maximum pressure valve to protect against overloads
  • Minimum height of only 90 mm, for optimum loading of
  • sports cars, avoiding contact between the underbody and lifting
    platform
Visit Product Page

RAV 4402

Four Post Wheel Alignment Lift

RAV 4402 at-a-glance

  • The hydraulic cylinder is located inside the fixed platform and is thus perfectly protected
  • High-resistant, galvanized and pre-stretched metal cables
  • Large-diameter pulleys with self-lubricating and maintenance-free bushes
  • Adjustable platform to accommodate different vehicle tracks and optimized access to the vehicle underbody
  • Automatic mechanical backup safety devices (every 100mm) with pneumatic release allowing stationary operation with unladen cables
  • Immediate triggering of safety stud devices in the event a cable slackens or fails
  • Automatic anti-toe trap alarm during final stages of lift descent
  • Mechanical, electrical, and hydraulic safety devices in compliance with the prevailing standard for CE certification
  • Low-voltage (24V) electrical system with control circuit, with provision for front turn plates and integrated rear slip plates
Visit Product Page
Load More
Facebook-f Instagram Linkedin Youtube

Bangalore

Delhi

Pune

    © 2023 Madhus Garage Equipment Pvt. Ltd.